Range Rover: Seat belt care
The belt should be replaced if webbing becomes frayed, contaminated or damaged. It is essential to replace the entire assembly after it has been worn in a severe impact even if damage to the assembly is not obvious.
If any damage, wear, cuts, defects, or impaired operation are noted with the seat belts, the vehicle should be taken to a Land Rover Retailer/Authorized Repairer for immediate attention. Do not use the vehicle if the seat belts cannot be operated correctly. Care must be taken to avoid contamination of the webbing with polishes, oils and chemicals, and particularly battery acid.
Cleaning may safely be carried out using mild soap and water. Contaminated seat belts may not operate correctly in an impact and cannot be relied upon.
When using seat belts to restrain items other than occupants, take care to ensure that the belts are not damaged, or exposed to sharp edges.
Using seat belts and child safety locks
1. SEAT BELT HEIGHT ADJUSTMENT: Press to release the catch.
With the catch depressed move the mechanism slide up or down to the required
height. Ensure that the locking mechanism has engaged.
Wh ...
Seat belt checks
Note: If the vehicle is parked on an incline, the seat belt mechanism may lock.
This is not a fault and the belt should be gently eased out from the upper anchorage.
The seat belts should be inspec ...
See also:
Child restraints
...
Snow chains
For safety reasons, Mercedes-Benz
recommends that you only use snow chains
which have been specially approved for your
vehicle by Mercedes-Benz, or are of a
corresponding standard of quality.
...
Removing the spare wheel
WARNING
Remove the spare wheel prior to jacking the vehicle, to avoid destabilizing the
vehicle when raised.
The spare wheel is heavy and if handled incorrectly may cause injury. Use extreme ...
