Cadillac Escalade: Hitch Cover (without Dual Exhaust)
The vehicle may have a hitch cover. To remove the hitch cover:
1. Turn the fasteners on the lower tabs 90 degrees counterclockwise.
2. Lift the lower edge of the cover about 45 degrees.
3. Pull the cover downward to disengage the upper attachments.
To reinstall the hitch cover:
1. Hold the cover at a 45 degree angle to the vehicle and push the upper tabs in the hitch cover into the chrome slots in the fascia.
2. Move the bottom of the cover forward until the lower tabs line up with the lower fascia slots.
3. Snap the hitch cover into place by pushing the upper corners forward.
4. Turn the fasteners on the lower tabs 90 degrees clockwise to lock the cover in place.
Weight-Distributing Hitch Adjustment
A. Body to Ground Distance B. Front of Vehicle When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow veh ...Hitch Cover (with Dual Exhaust)
To remove the hitch cover: 1. Turn the fasteners on the lower tabs 90 degrees counterclockwise. 2. Pull the lower edge of the cover out slightly. 3. Lift the cover up off the upper bracket. To r ...See also:
SmartKey battery
Important safety notes
It is advisable to have batteries replaced at a
qualified specialist workshop, e.g. at an
authorized Mercedes-Benz Center.
WARNING
Batteries contain toxic and c ...
Using the USB Port
For vehicles with a USB port, the connector is located in the instrument panel
storage area.
See Instrument Panel Storage for more information.
Radios with a USB port can control a USB stora ...
How the air bag deactivation systemworks
The BabySmart™ system is standard
equipment in Canada.
WARNING
Accident statistics show that children
secured in the rear seats are safer than
children secured in the front-passenge ...