Infiniti QX: Voltmeter - Meters and gauges - Instruments and controls - Infiniti QX Owner's ManualInfiniti QX: Voltmeter

When the ignition switch is pushed to the

When the ignition switch is pushed to the ON position, the volt meter indicates the battery voltage. When the engine is running, it indicates the generator voltage. While cranking the engine, the volt drop below the normal range. If the needle is not in the normal range (10.5 to 15.5 volt) while the engine is running, it may indicate that the charging system is not functioning properly. Have the system checked by an INFINITI retailer.

    Engine oil pressure gauge
    The gauge indicates the engine lubrication system oil pressure while the engine is running. When the engine speed is high, the engine oil pressure is also high. When it is low, the gauge ind ...

    Meter/ring illumination and needle sweep
    The ring illumination surrounding meters and gauges illuminates when the driver’s door is closed after getting into the vehicle with the Intelligent Key carried in. When the engine is starte ...

    See also:

    Engine emergency off
    If the engine cannot be switched off as described, observe the following procedure: ► Take the fuse allocation chart out of the vehicle tool kit. ► Search for fuse 120 in the fuse al ...

    Engine Cooling System Messages
    ENGINE HOT A/C (Air Conditioning) OFF This message displays when the engine coolant becomes hotter than the normal operating temperature. See Engine Coolant Temperature Gauge . To avoid added stra ...

    Lane Departure Warning (LDW)/Prevention (LDP) system (if so equipped)
    The Lane Departure Warning (LDW) system/ Lane Departure Prevention (LDP) system will operate when the vehicle is driven at speeds of approximately 45 MPH (70 km/h) and above, and when it is tr ...