Cadillac Escalade: Sheet Metal Damage
If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection.
Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.
Underbody Maintenance
Use plain water to flush dirt and debris from the vehicle's underbody. Your dealer
or an underbody car washing system can do this. If not removed, rust and corrosion
can develop. ...
Finish Damage
Quickly repair minor chips and scratches with touch-up materials available from
your dealer to avoid corrosion. Larger areas of finish damage can be corrected in
your dealer's body and paint sho ...
See also:
If No Steam Is Coming from the Engine Compartment
The ENGINE OVERHEATED STOP ENGINE or the ENGINE OVERHEATED IDLE ENGINE message,
along with a low coolant condition, can indicate a serious problem.
If there is an engine overheat warning, but see or ...
Global opening
Press and hold the unlock button for 3 seconds to unlock the vehicle and open
all of the windows.
To cancel global opening, press any of the buttons on the smart key or operate
the driver’s win ...
Checking engine coolant level
Check the coolant level in the reservoir
when the engine is cold. If the coolant
level is below MIN 2 , open the reservoir
tank cap and add coolant up to the MAX1
level. If the reservoir tan ...






