Infiniti QX: Inside mirror
Adjust the height and the angle of the inside mirror to the desired position.
Automatic anti-glare type
The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the indicator light A will illuminate and excessive glare from the headlights of the vehicle behind you will be reduced. Push the “” switch B to make the inside rearview mirror operate normally. The indicator light will turn off. Push the “I” switch C to turn the system on. Do not allow any object to cover the sensors D or apply glass cleaner on them. Doing so will reduce the sensitivity of the sensor, resulting in improper operation. For the HomeLink® Universal Transceiver operation, see “HomeLink® Universal Transceiver” in the “2. Instruments and controls” section.
Mirrors
...
Outside mirrors
WARNING
► Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. ...
See also:
Fuel tank capacity
Avoid the risk of running out of fuel and never intentionally drive the vehicle
when the fuel gauge indicates that the tank is empty. When refueling your vehicle
after the fuel gauge reads empty, ...
Points of interest (POI)
After selecting Points of interest from the menu, touch Name to input the POI
name, for example, Gasoline to display fuel stations on the map, or touch List for
a list of POIs. Alternatively, choo ...
Rapid air pressure loss
Rapid air pressure loss or a “blow-out” can
occur if the tire is punctured or is damaged
due to hitting a curb or pothole. Rapid air
pressure loss can also be caused by
driving on under-in ...
