Cadillac Escalade: Finish Damage
Quickly repair minor chips and scratches with touch-up materials available from your dealer to avoid corrosion. Larger areas of finish damage can be corrected in your dealer's body and paint shop.
Sheet Metal Damage
If the vehicle is damaged and requires sheet metal repair or replacement, make
sure the body repair shop applies anti-corrosion material to parts repaired or replaced
to restore corrosion protection ...
Chemical Paint Spotting
Airborne pollutants can fall upon and attack painted vehicle surfaces causing
blotchy, ring-shaped discolorations, and small, irregular dark spots etched into
the paint surface. ...
See also:
Stability control warning lamps
The DSC warning lamp in the instrument pack illuminates briefly when the ignition
is turned on.
If the warning lamp flashes rapidly during driving, the system is active.
A fault with the DSC sys ...
Power steering fluid
Check the fluid level in the reservoir.
The fluid level should be checked using the
HOT range (1 : HOT MAX., 2 : HOT MIN.).
at fluid temperatures of 122 to 1768F (50
to 808C) or using the CO ...
Activating/deactivating the residualheat function
It is possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes after
the engine has been switched off. The heating
time depends on th ...






