Buick Enclave: Security Light
The security light should come on briefly as the engine is started.
If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your dealer.
If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system.
This light is also used to indicate the status of the anti-theft alarm system when the ignition is turned off.
The light will flash rapidly if the alarm system is arming and one or more of the monitored entry points is not closed. The light will stay on if the alarm is arming and all entry points are closed.
For information regarding this light and the vehicle's security system, see Anti-theft Alarm System .
Engine Oil Pressure Light
WARNING
Do not keep driving if the oil pressure is low. The engine can become so hot
that it catches fire.
Someone could be burned. Check the oil as soon as possible and have the vehicle
service ...
High-Beam On Light
The high-beam on light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information. ...
See also:
Washer Fluid
What to Use
When adding windshield washer fluid, be sure to read the manufacturer's instructions
before use. If the vehicle will be operating in an area where the temperature may
fall below f ...
High-beam headlamps
► Switch off the lights.
► Open the hood.
► Turn housing cover 1
counter-clockwise
and pull it out.
► Turn bulb holder 2
counter-clockwise and
pull it out.
► ...
Additional Maintenance and Care
Your vehicle is an important investment and caring for it properly may help to
avoid future costly repairs. To maintain vehicle performance, additional maintenance
services may be required. It is ...
