Buick Enclave: High-Beam On Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick Enclave Owner's ManualBuick Enclave: High-Beam On Light

The high-beam on light comes on when the high-beam headlamps are in use.

The high-beam on light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer  for more information.

    Security Light
    The security light should come on briefly as the engine is started. If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your dea ...

    Front Fog Lamp Light
    The fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps  for more information. ...

    See also:

    Brake Pedal Travel
    See your dealer if the brake pedal does not return to normal height, or if there is a rapid increase in pedal travel. This could be a sign that brake service might be required. ...

    Under hood covers - refitting
    NOTICE Before refitting the underhood covers, ensure that no pipes, cables or other items, have been trapped between the cover and casing. 1. Slide the rear edge of the cover under the rubber ...

    Mud-ruts
    This program should be used for crossing terrain that is muddy, rutted, soft or uneven. Low range is recommended for this program and if not selected, the message center will prompt you. If th ...