Cadillac Escalade: Resetting the Power Folding Mirrors
Reset the power folding mirrors if:
- The mirrors are accidentally obstructed while folding.
- They are accidentally manually folded/unfolded.
- The mirrors will not stay in the unfolded position.
- The mirrors vibrate at normal driving speeds.
Fold and unfold the mirrors one time using the mirror controls to reset them to their normal position. A popping noise may be heard during the resetting of the power folding mirrors. This sound is normal after a manual folding operation.
See Power Mirrors .
Power Folding Mirrors
To fold the mirrors:
1. Press (C) to fold the mirrors out to the driving position.
2. Press (D) to fold the mirrors into the folded position. ...
Turn Signal Indicator
The vehicle has a turn signal indicator on the mirror. An arrow on the mirror
flashes in the direction of the turn or lane change. ...
See also:
Automatic transmission fluid
Contact an INFINITI retailer if replacement
is required.
CAUTION
► Use only Genuine NISSAN Matic S ATF.
Do not mix with other fluids.
► Using automatic transmission fluid other ...
3-D Lane Guidance
Some major metropolitan areas may include a 3-D lane guidance feature for highway
exits and junctions. This feature gives you an enhanced representation of the exits
and junctions on the route. ...
Vehicle-to-vehicle distance control mode operation
Always pay attention to the operation of
the vehicle and be ready to manually
control the proper following distance. The
vehicle-to-vehicle distance control mode of
the Intelligent Cruise Co ...