Buick Enclave: Replacement Bulbs
For replacement bulbs not listed here, contact your dealer.
License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license plate lamps to the liftgate
trim.
2. Turn and pull the license plate lamp forward through the liftgate trim op ...
See also:
Low-beam headlamps
► To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
► Turn the light switch to
.
The indicator lamp in the
instru ...
Rear lamp removal
To change any of the rear bulbs, it is necessary to completely remove the lamp
unit from the vehicle.
1. With the tailgate open, remove the two screws from the inner edge of the unit.
2. Pull th ...
Programming Universal Home Remote — Rolling Code
For questions or help programming the Universal Home Remote System, call 1-866-572-2728
or go to www.learcar2u.com.
Most garage door openers sold after 1996 are Rolling Code units. Programming
a ga ...
