Cadillac Escalade: Rear Window Wiper/Washer - Controls - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: Rear Window Wiper/Washer

The rear wiper control is located on the turn and lane-change lever.

To turn the rear wiper on, slide the lever to a wiper position.

(Rear Wiper Delay): Turns on the (Off): Turns the wiper off.

rear wiper delay. (Rear Wiper Delay): Turns on the rear wiper delay.

wiper. (Rear Wiper): Turns on the rear wiper.

on the end of the lever to spray washer fluid on the rear window. The wipers will (Rear Wiper Wash): Press this button on the end of the lever to spray washer fluid on the rear window. The wipers will clear the rear window and either stop or return to your preset speed. For more washer cycles, press and hold the button.

The rear window wiper/washer will not operate if the liftgate or liftglass is open or ajar. If the liftgate or liftglass is opened while the rear wiper is on, the wiper returns to the parked position and stops.

    Windshield Wiper/Washer
    The front wiper control is located on the turn and lane-change lever. Turn the band with the wiper symbol to control the windshield wipers. (Mist): For a single wipe, turn to , then release. For ...

    Compass
    Your vehicle may have a compass in the Driver Information Center (DIC). Compass Zone The zone is set to zone eight upon leaving the factory. Your dealer will set the correct zone for your location. ...

    See also:

    Transmission positions
    Park position Do not shift the transmission into position P() unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parking ...

    Contacting Roadside Assistance
    Roadside Assistance services are of no cost to you and available 24 hours a day, 365 days a year. Costs are only incurred in situations that exceed the limits of the program, some of which are liste ...

    Window reset
    The windows will need to be reset if the battery is disconnected, becomes discharged or power supply is interrupted. Reset as follows: 1. Close the window fully. 2. Release the switch, then lift ...