Infiniti QX: Rear
The 2nd row outboard seats are warmed by built-in heaters. The switches located on the back side of the center console can be operated independently of each other.
1. Start the engine.
2. Select heat range.
1 For high heat, push the HI (High)
side of the switch.
2 For low heat, push the LO (Low) side
of the switch.
The indicator light in the switch3 will
illuminate when the heater is on.
3. To turn off the heater, return the switch
to the level position. Make sure the
indicator light goes off.
The heater is controlled by a thermostat,
automatically turning the heater
on and off. The indicator light will
remain on as long as the switch is on.
When the vehicle’s interior is warmed,
or before you leave the vehicle, be sure
to turn off the switch.
Front
The front seats can be warmed by built-in
heaters. The switches located on the
instrument panel can be operated independently
of each other.
1. Start the engine.
2. Select heat range.
&# ...
Climate controlled seats (if so equipped)
The climate controlled seat warms up or
cools down the front seats by blowing
warm or cool air from the surface of the
seat. The switches located on the instrument
panel can be operated inde ...
See also:
Using snow chains
WARNING
Only use traction devices in heavy snow conditions, on hard road surfaces.
Dynamic Stability Control (DSC) must be switched off when using traction devices.
Never exceed 30 mph (50 km/ ...
Deselecting valet mode
When you enter the vehicle, touch the Valet button to view the Valet mode screen.
Enter your 4 digit PIN and touch the OK button. Valet mode deactivated is displayed
to indicate that your PIN has ...
Setting DSR
With the DSR speed function, you can set the
speed of DSR (the speed for driving downhill) to a value between 3 mph (Canada: 4 km/h) and 10 mph (Canada:
18 km/h). The adjustments are made in
1-mp ...
