Infiniti QX: Front
The front seats can be warmed by built-in
heaters. The switches located on the
instrument panel can be operated independently
of each other.
1. Start the engine.
2. Select heat range.
► For high heat, push the HI (High)
side of the switch 1 .
► For low heat, push the LO (Low) side
of the switch 2 .
► The indicator light3 will illuminate
when the heater is on.
3. To turn off the heater, push the “HI” or
“LO” side (whichever is selected) of the
switch. Make sure the indicator light
turns off.
Heated seats (if so equipped)
WARNING
Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or have
an inability to feel pain in body parts that
contact t ...
Rear
The 2nd row outboard seats are warmed by
built-in heaters. The switches located on
the back side of the center console can be
operated independently of each other.
1. Start the engine.
...
See also:
Selecting HDC
1. Press to switch HDC on and off.
2. Press to increase the set speed.
3. Press to decrease the set speed.
HDC can be selected at speeds below 50 mph (80 km/h).
HDC can be used in D, R or Comman ...
Vehicle Storage
Tires age when stored normally mounted on a parked vehicle. Park a vehicle that
will be stored for at least a month in a cool, dry, clean area away from direct
sunlight to slow aging. This area shou ...
Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread
shoulder and maximum section width. For example: ...
