Mercedes-Benz GL-Class: Switching on Blind Spot Assist
► Make sure that the radar sensor system and Blind Spot Assist are activated in the on-board
computer.
► Turn the SmartKey to position 2 in the
ignition lock.
Warning lamps 1 light up red in the exterior mirrors for approximately 1.5 seconds and then turn yellow.
Collision warning
If a vehicle is detected in the monitoring range
of Blind Spot Assist and you switch on the turn
signal, a double warning tone sounds. Red
warning lamp 1 flashes. If the turn signal
remains on, de ...
Trailer towing
When you attach a trailer, make sure you have
correctly established the electrical
connection. This can be accomplished by checking the trailer lighting. In this
event,
Blind Spot Assist is deact ...
See also:
Additional Program Information
All program options, such as shuttle service, may not be available at every dealer.
Please contact your dealer for specific information about availability. All Courtesy
Transportation arrangements w ...
Checking engine oil level
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn off the engine. Wait more than 15
minutes for the oil ...
Cancel route guidance
To stop route guidance, proceed as follows:
1. Touch Nav menu on the map menu screen.
2. Touch the Cancel guidance soft key. ...
