Range Rover: License plate lamp bulb replacement - Maintenance - Range Rover Owner's ManualRange Rover: License plate lamp bulb replacement

Range Rover / Range Rover Owner's Manual / Maintenance / License plate lamp bulb replacement

1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate.

1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate.

2. Twist the bulb holder counter-clockwise to unlock then pull to remove. Pull out the bulb to remove.

    Side repeater lamp bulb replacement
    Follow the steps illustrated. Insert a new bulb and refit the components. ...

    Interior lamp bulb replacement
    Follow the steps illustrated. Insert a new bulb and refit the components. 1. Footwell, puddle and loadspace lamps. 2. Courtesy lamp and map lamps. 3. Vanity mirror lamps. 4. Rear courtesy lamps. ...

    See also:

    Removing a wheel
    ► Unscrew the uppermost wheel bolt completely. ► Screw alignment bolt 1 into the thread instead of the wheel bolt. ► Unscrew the remaining wheel bolts fully. Do not place wh ...

    BSW system operation
    If the radar sensors detect vehicles in the detection zone, the BSW/Blind Spot InterventionTM indicator light located inside the outside mirrors illuminates. If the turn signal is then activ ...

    Delayed Locking
    When locking the doors with the power lock switch and a door or the liftgate is open, the doors will lock five seconds after the last door is closed. You will hear three chimes to signal that the de ...