Range Rover: Interior lamp bulb replacement
Follow the steps illustrated. Insert a new bulb and refit the components.
1. Footwell, puddle and loadspace lamps.
2. Courtesy lamp and map lamps.
3. Vanity mirror lamps.
4. Rear courtesy lamps.
License plate lamp bulb replacement
1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate.
2. Twist the bulb holder counter-clockwise to unlock then pull to remove. Pull
out the bulb to remove. ...
Window reset
The windows will need to be reset if the battery is disconnected, becomes discharged
or power supply is interrupted.
Reset as follows:
1. Close the window fully.
2. Release the switch, then lift ...
See also:
Cruise control
Important safety notes
Cruise control maintains a constant road
speed for you. It brakes automatically in order
to avoid exceeding the set speed. On long and
steep downhill gradients, especially i ...
Loading tips
► The GVW must not exceed GVWR
or GAWR as specified on the F.M.V.
S.S./C.M.V.S.S. certification label.
► Do not load the front and rear axle
to the GAWR. Doing so will exceed
the ...
Uniform tire quality grading
DOT (Department Of Transportation) Quality
Grades: All passenger car tires must
conform to federal safety requirements in
addition to these grades.
Quality grades can be found where applicable ...
