Mercedes-Benz GL-Class: Removing a wheel
► Unscrew the uppermost wheel bolt
completely.
► Screw alignment bolt 1 into the thread
instead of the wheel bolt.
► Unscrew the remaining wheel bolts fully.
Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in.
► Remove the wheel.
Raising the vehicle
WARNING When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up the vehi ...Mounting a new wheel
WARNING Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be repaired immediately. Do not continue to ...See also:
Engine Coolant
The cooling system in the vehicle is filled with DEX-COOL® engine coolant. The
coolant is designed to remain in the vehicle for 5 years or 240 000 km (150,000
mi), whichever occurs first.
The fo ...
Air quality sensor
Press once to activate air recirculation. Press again to activate automatic air
recirculation.
In automatic mode, air recirculation is regulated to achieve optimum air conditioning
performance. ...
Automatic transmission
WARNING
It is dangerous to shift the automatic
transmission out of parking position P or
neutral position N if the engine speed is
higher than idle speed. If your foot is not firmly
o ...