Cadillac Escalade: Headlamp High/Low-Beam Changer - Exterior Lighting - Lighting - Cadillac Escalade Owner's ManualCadillac Escalade: Headlamp High/Low-Beam Changer

To change the headlamps from low to high beam, push the lever toward the instrument (Headlamp High/Low Beam Changer): To change the headlamps from low to high beam, push the lever toward the instrument panel. To return to low-beam headlamps, pull the multifunction lever toward you. Then release it.

When the high beams are on, this indicator light on the instrument panel cluster

When the high beams are on, this indicator light on the instrument panel cluster will also be on.

    Exterior Lamps Off Reminder
    If a door is open, a reminder chime sounds when the headlamps or parking lamps are manually turned on and the key is out of the ignition. To turn off the chime, turn the headlamp switch to off or AU ...

    Flash-to-Pass
    Use your high-beam headlamps to signal to a driver in front that you want to pass. It works even if the headlamps are in the automatic position. To use it, pull the turn signal lever toward you, the ...

    See also:

    Engine number
    1 Emission control information plate, including the certification of both federal and Californian emissions standards 2 Engine number (stamped into the crankcase) 3 VIN (on the lower edge of th ...

    Auxiliary Devices
    The vehicle may have a 3.5mm (1/8 in) auxiliary input jack located on the lower right side of the faceplate and for vehicles with a USB port, it is located in the instrument panel storage area. ...

    Fuel Gauge
    Metric     English When the ignition is on, the fuel gauge shows about how much fuel the vehicle has left in the fuel tank. An arrow on the fuel gauge indicates the side of the ve ...