Cadillac Escalade: Flash-to-Pass
Use your high-beam headlamps to signal to a driver in front that you want to pass. It works even if the headlamps are in the automatic position.
To use it, pull the turn signal lever toward you, then release it.
If the headlamps are in the automatic position or on low beam, the high-beam headlamps turn on. They stay on as long as the lever is held. The high-beam indicator on the instrument panel cluster comes on. Release the lever to return to normal operation.
Headlamp High/Low-Beam Changer
(Headlamp High/Low Beam Changer):
To change the headlamps from low to high beam, push the lever toward the instrument
panel. To return to low-beam headlamps, pull the multifunction lever toward you ...
Daytime Running Lamps (DRL)
Daytime Running Lamps (DRL) can make it easier for others to see the front of
your vehicle during the day. Fully functional daytime running lamps are required
on all vehicles first sold in Canada.
...
See also:
Glare from the side
► Fold down sun visor 1.
► Pull sun visor 1 out of retainer 3.
► Swing sun visor 1 to the side.
► Vehicles with a sliding sunroof: slide sun
visor 1 horizontally as desir ...
Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant surge tank. If the coolant
inside the coolant surge tank is boiling, do not ...
Using the system
Initialization
When the ignition switch is pushed to the
ON position, INFINITI Voice Recognition is
initialized, which may take up to one
minute. When completed, the system is
ready to accept ...
