Cadillac Escalade: Vehicle Personalization
Your vehicle may have customization capabilities that allow you to program certain features to one preferred setting. Customization features can only be programmed to one setting on the vehicle and cannot be programmed to a preferred setting for two different drivers.
All of the customization options may not be available on your vehicle. Only the options available will be displayed on the DIC.
The default settings for the customization features were set when your vehicle left the factory, but may have been changed from their default state since then.
The customization preferences are automatically recalled.
To change customization preferences, use the following procedure.
Washer Fluid Messages
WASHER FLUID LOW ADD FLUID
This message displays when the windshield washer fluid is low. Fill the windshield
washer fluid reservoir as soon as possible. See Engine Compartment Overview ...
Entering the Feature Settings Menu
1. Turn the ignition on and place the vehicle in P (Park). To avoid excessive
drain on the battery, it is recommended that the headlamps are turned off.
2. Press the customization button to scroll t ...
See also:
Emergency brake assist (EBA)
If the driver rapidly applies the brakes, EBA automatically boosts the braking
force to its maximum, in order to bring the vehicle to a halt as quickly as possible.
If the driver applies the brake ...
Ignition Positions
The ignition switch has four different positions.
In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY
and the brake pedal must be applied.
Notice: Using a tool to ...
After towing on four wheels
1. Apply the parking brake.
2. Switch on the ignition and apply the foot brake.
3. Place the auto selector lever in the park position.
4. Switch off the ignition and remove the Smart Key from the v ...
