Cadillac Escalade: Erasing Speed Memory - Cruise Control - Cruise Control - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Erasing Speed Memory

The cruise control set speed is erased from memory by pressing the off. button or if the ignition is turned off.

    Ending Cruise Control
    There are three ways to end cruise control: To disengage cruise control, step lightly on the brake pedal. Press on the steering wheel. To turn off the cruise control, press on the steering ...

    See also:

    Park Brake and P (Park) Mechanism Check
    WARNING When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begi ...

    Making adjustments in 1 mph (Canada:1 km/h) increments
    ► Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...

    Fog Lamps
    For vehicles with fog lamps, they can be used for better vision in foggy or misty conditions. The parking lamps and/or low-beam headlamps must be on for the fog lamps to work. The fog lamp button ...