Cadillac Escalade: Ending Cruise Control - Cruise Control - Cruise Control - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Ending Cruise Control

There are three ways to end cruise control:

  • To disengage cruise control, step lightly on the brake pedal.
  • Press To turn off the cruise control, press on the steering wheel.
  • To turn off the cruise control, press on the steering wheel.
    Using Cruise Control on Hills
    How well the cruise control works on hills depends on the vehicle speed, the load, and the steepness of the hills. When going up steep hills, pressing the accelerator pedal may be necessary to maint ...

    Erasing Speed Memory
    The cruise control set speed is erased from memory by pressing the button or if the ignition is turned off. ...

    See also:

    System operation
    The automatic drive positioner system will not work or will stop operating under the following conditions: ► When the vehicle speed is above 4 MPH (7 km/h). ► When the adjusting s ...

    Brake fluid
    WARNING   The brake fluid constantly absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in the brake ...

    Setting a speed
    WARNING   Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing ro ...