Starting the engine

1. Apply the parking brake. 2. Move the selector lever to the P (Park) or N (Neutral) position. (P is recommended.). The starter is designed not to operate unless the selector lever is in eith ...

Engine protection mode

The engine has an engine protection mode to reduce the chance of damage if the coolant temperature becomes too high (for example, when climbing steep grades in high temperature with heavy load ...

See also:

Starter Switch Check
WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room ar ...

Tire and Loading Information Label
Label Example A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock po ...

Headlamps fogged up on the inside
The headlamps may fog up on the inside if there is high atmospheric humidity. ► Drive with the headlamps switched on. The level of moisture diminishes, depending on the length of the jou ...