Infiniti QX: Engine protection mode - Driving the vehicle - Starting and driving - Infiniti QX Owner's ManualInfiniti QX: Engine protection mode

The engine has an engine protection mode to reduce the chance of damage if the coolant temperature becomes too high (for example, when climbing steep grades in high temperature with heavy loads, such as when towing a trailer). When the engine temperature reaches a certain level:
► The engine coolant temperature gauge will move toward the H position.
► Engine power may be reduced.
► The air conditioning cooling function may be automatically turned OFF for a short time (the blower will continue to operate). Engine power and, under some conditions, vehicle speed will decrease. Vehicle speed can be controlled with the accelerator pedal, but the vehicle may not accelerate at the desired speed. The transmission will downshift or upshift as it reaches prescribed shift points. You can also shift manually. As driving conditions change and engine coolant temperature is reduced, vehicle speed can be increased using the accelerator pedal, and air conditioning cooling function will automatically be turned back ON. If: 1. The engine coolant temperature is not reduced. 2. The air conditioning cooling function does not turn back ON. 3. The engine oil pressure warning light temperature gauge does not return to illuminates or engine coolant temperature gauge does not return to the normal range from the H position, this may indicate a malfunction. Move the vehicle off the road to a safe area and allow the engine to cool. If after checking the oil and coolant, the on or engine coolant temperatureremains on or engine coolant temperature does not return to the normal range, do not continue to drive and contact an INFINITI retailer. The Malfunction Indicator Light (MIL)may also come ON. You do not need to may also come ON. You do not need to have your vehicle towed, unless it remains on, but have it inspected soon by an INFINITI retailer. See “Warning/indicator lights and audible reminders” in the “2. Instruments and controls” section.

Overheating can result in reduced engine WARNING
Overheating can result in reduced engine power and vehicle speed. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If the vehicle cannot maintain a safe driving speed, pull to the side of the road in a safe area. Allow the engine to cool and return to normal operation. See “If your vehicle overheats” in the “6. In case of emergency” section.

CAUTION
Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by warranty. Turn off the engine as soon as it is safe to do so.

    Automatic transmission
    7 speed automatic transmission The automatic transmission in your vehicle is electronically controlled by a transmission control module to produce maximum efficiency and smooth operation. Sho ...

    See also:

    Remote Keyless Entry (RKE) System
    See Radio Frequency Statement   for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. If there is a decr ...

    Rear Climate Control System (Rear Climate with Rear Seat Audio)
    For vehicles with the rear heat and air conditioning controls, they are integrated with the rear seat audio controls located in the center console. The system can be controlled from the front contro ...

    Releasing seat belts
    ► Press release button 4 and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped i ...