Mercedes-Benz GL-Class: Calling up a stored setting
► Press and hold the relevant storage position button 1, 2 or 3 until the seat, steering wheel and exterior mirrors are in the stored position.
The setting procedure is interrupted as
soon as you release the storage position
button.
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
• position of the seat, ...
See also:
Parking Brake
Set the parking brake by holding the regular brake pedal down, then pushing down
the parking brake pedal.
If the ignition is on, the brake system warning light will come on. See Brake
System Warn ...
Engine number
1 Emission control information plate,
including the certification of both federal
and Californian emissions standards
2 Engine number (stamped into the
crankcase)
3 VIN (on the lower edge of th ...
Emergency engine shut off
To shut off the engine in an emergency
situation while driving, perform the following
procedure:
► Rapidly push the push-button ignition
switch 3 consecutive times in less than
1.5 sec ...







