Cadillac Escalade: Brake System Messages - Vehicle Messages - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: Brake System Messages

SERVICE BRAKE SYSTEM

This message displays along with the brake system warning light if there is a problem with the brake system. See Brake System Warning Light  . If this message appears, stop as soon as possible and turn off the vehicle. Restart the vehicle and check for the message on the DIC display. If the message is still displayed or appears again when you begin driving, the brake system needs service as soon as possible. See your dealer.

SERVICE BRAKES SOON

This message displays if there is a problem with the brake system. If this message appears, stop as soon as possible and turn off the vehicle. Restart the vehicle and check for the message on the DIC display. If the message is still displayed or appears again when you begin driving, the brake system needs service. See your dealer.

    Battery Voltage and Charging Messages
    BATTERY LOW START VEHICLE When the vehicle’s battery is severely discharged, this message will display and four chimes will sound. Start the vehicle immediately. If the vehicle is not started and ...

    Door Ajar Messages
    DRIVER DOOR OPEN This message displays and a chime sounds if the driver door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstru ...

    See also:

    Instrument panel
    1. Tachometer. 2. Clock. 3. Message center. 4. External temperature. 5. Speedometer. 6. Fuel gauge: NOTICE Never allow the engine to run out of fuel. The resultant misfire can seriousl ...

    Storage Compartments
    For vehicles with a second row center console, press the buttons (B) or (C) to access storage areas. Lift up on (A) for additional storage area. See Floor Console Storage . ...

    Checking engine coolant level
    Check the coolant level in the reservoir when the engine is cold. If the coolant level is below MIN 2 , open the reservoir tank cap and add coolant up to the MAX1 level. If the reservoir tan ...