Infiniti QX: Before starting the engine
► Make sure the area around the vehicle
is clear.
► Check fluid levels such as engine oil,
coolant, brake fluid and window
washer fluid as frequently as possible,
or at least whenever you refuel.
► Check that all windows and lights are
clean.
► Visually inspect tires for their appearance
and condition. Also check tires for
proper inflation.
► Lock all doors.
► Position seat and adjust head restraints/
headrests.
► Adjust inside and outside mirrors.
► Fasten seat belts and ask all passengers
to do likewise.
► Check the operation of warning lights
when the ignition switch is pushed to
the ON position. (See “Warning/indicator
lights and audible reminders” in the
“2. Instruments and controls” section.)
Intelligent Key battery discharge
If the battery of the Intelligent Key is
discharged, or environmental conditions
interfere with the Intelligent Key operation,
start the engine according to the following
procedure:
1. Mov ...
Starting the engine
1. Apply the parking brake.
2. Move the selector lever to the P (Park)
or N (Neutral) position. (P is recommended.).
The starter is designed not to operate
unless the selector lever is in eith ...
See also:
Topping up the oil
Your vehicle warranty may be invalidated if damage is caused by using oil that
does not meet the required specification.
Failure to use an oil that meets the required specification could cause exce ...
Tire Pressure Monitor Operation
This vehicle may have a Tire Pressure Monitor System (TPMS).
The TPMS is designed to warn the driver when a low tire pressure condition exists.
TPMS sensors are mounted onto each tire and wheel ass ...
Steering Wheel Adjustment
Push the control up or down to tilt the steering wheel up or down.
To set the memory position, see Vehicle Personalization . ...
