Buick Enclave: Antilock Brake System (ABS) Warning Light

The ABS warning light comes on briefly when the ignition key is turned to ON/RUN. This is normal.
If the light does not come on then, have it fixed so it will be ready to warn you if there is a problem.
If the light stays on, turn the ignition to LOCK/OFF. If the light comes on while driving, stop as soon as possible and turn the ignition off.
Then start the engine again to reset the system. If the light still stays on, or comes on again while driving, the vehicle needs service. If the regular brake system warning light is not on, there are still brakes, but no antilock brakes. If the regular brake system warning light is also on, there are no antilock brakes and there is a problem with the regular brakes. See Brake System Warning Light
Brake System Warning Light
The vehicle brake system consists of two hydraulic circuits.
If one circuit is not working, the remaining circuit can still work to stop the
vehicle. For normal braking performance, both circuits n ...
Tow/Haul Mode Light
This light comes on when the Tow/Haul mode has been activated.
For more information, see Tow/Haul Mode . ...
See also:
Airbag System Messages
SERVICE AIR BAG
This message displays if there is a problem with the airbag system.
Have your dealer inspect the system for problems. See Airbag Readiness Light
and Airbag System for m ...
Windows
Press the switch to lower the window. Pull the switch up to raise it.
For more information, see Power Windows . ...
Meters and gauges
1. Tachometer
2. Warning/Indicator lights
3. Speedometer
4. Engine coolant temperature gauge
5. Voltmeter
6. Dot matrix liquid crystal display/
Odometer/twin trip odometer
7. Engine oi ...






