Cadillac Escalade: Windshield Wiper/Washer - Initial Drive Information - In Brief - Cadillac Escalade Owner's ManualCadillac Escalade: Windshield Wiper/Washer

The front and rear wiper controls are located on the turn and lane-change lever.

The front and rear wiper controls are located on the turn and lane-change lever.

Turn the band with the wiper symbol to control the windshield wipers.

, then release. For several wipes, hold: For a single wipe, turn to the band on  longer., then release. For several wipes, hold the band on : Turns the windshield wipers off. longer.

: Turn the band up for more frequent : Turns the windshield wipers off.

wipes or down for less frequent wipes. : Turn the band up for more frequent wipes or down for less frequent wipes.

: Fast wipes.: Slow wipes.

: Push the paddle at the top of the: Fast wipes.

lever to spray washer fluid on the windshield.: Push the paddle at the top of the lever to spray washer fluid on the windshield.

Rear Wiper Window Wiper/Washer

To turn the rear wiper on, slide the lever to a wiper position.

: Turns on the rear wiper delay. : Turns the wiper off. : Turns on the rear wiper. : Turns on the rear wiper delay. : Press the button on the end of the: Turns on the rear wiper. lever to spray washer fluid on the rear window. : Press the button on the end of the lever to spray washer fluid on the rear window.

See Windshield Wiper/Washer   and Rear Window Wiper/Washer  .

    Exterior Lighting
    The exterior lamps control is located on the instrument panel to the left of the steering wheel. : Turns off the automatic headlamps and Daytime Running Lamps (DRL). Turning the headlamp control ...

    Climate Controls
    The heating, cooling, and ventilation in the vehicle can be controlled with this system. Climate Control with Cooled and Heated Seats shown A. Driver and Passenger Temperature Controls B. AUTO ( ...

    See also:

    Adding Washer Fluid
    The vehicle has a low washer fluid message on the DIC that comes on when the washer fluid is low. The message is displayed for 15 seconds at the start of each ignition cycle. When the WASHER FLUID L ...

    Welcome light
    To activate or deactivate the welcome light function, perform the following procedure. 1. Push the ignition switch to the ON position. 2. Open the driver’s side door. 3. Within 20 second ...

    Front head restraints
    WARNING Head restraints are designed to support the head not the back of the neck. The head restraint must be positioned correctly to restrain rearward movement of the head in a collision. ...