Cadillac Escalade: Shoulder Belt Height Adjuster - Lap-Shoulder Belt - Safety Belts - Seats and Restraints - Cadillac Escalade Owner's ManualCadillac Escalade: Shoulder Belt Height Adjuster

The vehicle has a shoulder belt height adjuster for the driver and right front passenger positions.

Adjust the height so the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly  .

Squeeze the buttons (A) on the sides of the height adjuster and move the height

Squeeze the buttons (A) on the sides of the height adjuster and move the height adjuster to the desired position.

The adjuster can be moved up just by pushing up on the shoulder belt guide.

After the adjuster is set to the desired position, try to move it down without squeezing the buttons to make sure it has locked into position.

    Lap-Shoulder Belt
    All seating positions in the vehicle have a lap-shoulder belt except for the center front passenger position, if equipped, which has a lap belt. See Lap Belt   for more information. The la ...

    Safety Belt Pretensioners
    This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the s ...

    See also:

    Notes on driving
    • If the vehicle is heavily laden, check the tire pressures and correct them if necessary. • When parking your vehicle, make sure that the tires do not get deformed by the curb or other obst ...

    Destination
    Press DEST to access the Destination Entry screen. From this screen, you can select from several options to plan a route by entering destination points. To enter a destination, choose from one of ...

    Roof
    Sunroof A. Open or Close B. Vent On vehicles with a sunroof, the sunroof only operates when the ignition is in the ACC/ACCESSORY or ON/RUN, or when Retained Accessory Power (RAP) is active. See ...