Cadillac Escalade: Weight-Distributing Hitch Adjustment - Towing Equipment - Towing - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Weight-Distributing Hitch Adjustment

A. Body to Ground Distance

A. Body to Ground Distance
B. Front of Vehicle

When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow vehicle and adjusting the hitch.

    Hitches
    The correct hitch equipment helps maintain combination control. Many trailers can be towed with a weight carrying hitch which simply features a coupler latched to the hitch ball, or a tow eye latche ...

    Hitch Cover (without Dual Exhaust)
    The vehicle may have a hitch cover. To remove the hitch cover: 1. Turn the fasteners on the lower tabs 90 degrees counterclockwise. 2. Lift the lower edge of the cover about 45 degrees. 3. Pull t ...

    See also:

    Engine Compartment Fuse Block
    The Engine Compartment Fuse Block is located in the engine compartment, on the driver side of the vehicle. Lift the cover for access to the fuse/relay block. If the vehicle is a hybrid, see the hy ...

    Safety System Check
    Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt sys ...

    Safety systems
    Display messages (USA only) (Canada only) The red brake system warning lamp comes on while the engine is running. A warning tone also sounds. Possible causes/consequences and ► Soluti ...