Infiniti QX: Vehicle information and settings
- How to use STATUS button
- How to use brightness control and display ON/OFF button
- How to use INFO button
- How to use SETTING button
How to select menus on the screen
Vehicle functions are viewed on the display
screen in menus. To select each key item,
highlight the preferred item using the
INFINITI controller and push the ENTER
button.
Whenever a menu ...
How to use STATUS button
To display the status of the audio, air
conditioner system, fuel consumption and
navigation system, push the STATUS button.
The following information will appear
when the STATUS button is push ...
See also:
Voltmeter
When the ignition switch is pushed to the
ON position, the volt meter indicates the
battery voltage. When the engine is running,
it indicates the generator voltage.
While cranking the engine ...
Air bag operation
WARNING
National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance
of 10 in. (25 cm) between an occupant's chest and the driver’s air bag module.
WARNING
...
License Plate Lamp
1. Remove the two screws holding each of the license plate lamps to the molding
that is part of the liftgate.
2. Twist and pull the license plate lamp assembly forward through the molding
opening ...
