Mercedes-Benz GL-Class: Switching the rear window wiper on/off
Combination switch
1 Switch
2 To wipe with washer fluid
3 To switch on intermittent wiping
4 0 To switch off intermittent wiping
5 To wipe with washer fluid
► Turn the SmartKey to position 1 or 2 in
the
ignition lock.
► Turn switch 1 on the combination switch
to the corresponding position.
When the rear window wiper is switched on, the icon appears in the instrument cluster.
Switching the windshield wipers on/off
WARNING
Wiper blades are components that are subject
to wear and tear. Replace the wiper blades
twice a year, preferably in the spring and fall.
Otherwise the windows will not be wiped ...
See also:
Underbody
In areas where road salt is used in winter,
the underbody must be cleaned regularly.
This will prevent dirt and salt from building
up and causing the acceleration of corrosion
on the underbody ...
System maintenance
► The two radar sensor units 1 for the
BSW and Blind Spot InterventionTM
systems are located near the rear
bumper. Always keep the area near
the radar sensors clean. Do not attach
st ...
Airbag Readiness Light
This light shows if there is an electrical problem. The system check includes
the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules,
the wiring, and the crash sensi ...