Mercedes-Benz GL-Class: Standard display
► Press the button on the steering wheel to select the standard display.
Standard display
1 Trip odometer
2 Odometer
You can select the following functions in the Standard display menu using the button:
• tire pressure loss warning system (Canada only)
• tire pressure monitor (USA
only)
• coolant temperature
• digital speedometer or outside
temperature
• ASSYST PLUS service interval display
► To reset the trip odometer: press and hold the R reset button in the instrument cluster until the trip odometer is reset.
Displaying the coolant temperature
WARNING Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an over ...See also:
Engine oil
Vehicles with a diesel particle filter:
If the vehicle is mostly driven for short
distances, it is possible that malfunctions
may occur during the automatic cleaning of
the diesel particle fil ...
Air cleaner
To remove the filter, release the lock pins
1 and pull the unit upward 2 .
The filter element should not be cleaned
and reused. Replace it according to the
maintenance intervals. See “INFI ...
Automatic low speed switch-OFF
If the speed of the vehicle decreases below 18 mph (30 km/h), the ACC system
will be automatically switched off and the warning lamp will go out.
If the brakes were being applied by the ACC system, ...