Infiniti QX: Selecting vehicle-to-vehicle distance control mode - Intelligent Cruise Control (ICC) system (if so equipped) - Starting and driving - Infiniti QX Owner's ManualInfiniti QX: Selecting vehicle-to-vehicle distance control mode

To choose the vehicle-to-vehicle distance control mode1 , quickly push and release the MAIN switch A .

    Intelligent Cruise Control (ICC) system (if so equipped)
    The Intelligent Cruise Control (ICC) system automatically maintains a selected distance from the vehicle traveling in front of you according to that vehicle’s speed (up to the set speed), or ...

    Vehicle-to-vehicle distance control mode
    In the vehicle-to-vehicle distance control mode, the Intelligent Cruise Control (ICC) system automatically maintains a selected distance from the vehicle traveling in front of you according to ...

    See also:

    Headlamps fogged up on the inside
    The headlamps may fog up on the inside if there is high atmospheric humidity. ► Drive with the headlamps switched on. The level of moisture diminishes, depending on the length of the jou ...

    Removing a wheel
    ► Unscrew the uppermost wheel bolt completely. ► Screw alignment bolt 1 into the thread instead of the wheel bolt. ► Unscrew the remaining wheel bolts fully. Do not place wh ...

    Removing the Spare Tire and Tools
    The equipment needed to change a flat tire is stored under the storage tray, located on the driver side trim panel, over the rear wheelhouse. Regular Wheelbase Shown, Extended Wheelbase Similar. ...