Cadillac Escalade: Safety Chains
Always attach chains between the vehicle and the trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer. Safety chains should be attached to holes on the trailer hitch platform. Always leave just enough slack so the combination can turn. Never allow safety chains to drag on the ground.
Hitch Cover (with Dual Exhaust)
To remove the hitch cover:
1. Turn the fasteners on the lower tabs 90 degrees counterclockwise.
2. Pull the lower edge of the cover out slightly.
3. Lift the cover up off the upper bracket.
To r ...
Trailer Brakes
A loaded trailer that weighs more than 900 kg (2,000 lbs) needs to have its own
brake system that is adequate for the weight of the trailer. Be sure to read and
follow the instructions for the trail ...
See also:
Cargo Tie-Downs
Four cargo tie-downs are located in the rear compartment of the vehicle.
The tie-downs can be used to secure small loads. ...
Ride Control System Messages
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak® system. If
this message appears, try to reset the system. Stop; turn off the engine for at
least 15 seconds; ...
Important safety notes
The HomeLink® garage door opener
integrated in the rear-view mirror allows you
to operate up to three different door and gate
systems.
Certain garage door drives are
incompatible with the integ ...






