Mercedes-Benz GL-Class: Replacing the windshield wiper blades
Removing the wiper blades
► Remove the SmartKey from the ignition
lock.
► Fold the wiper arm away from the
windshield.
► Press both release clips 2.
► Fold wiper blade 1 in the direction of
arrow 3 away from wiper arm 4.
► Remove wiper blade 1 in the direction of
arrow 5.
Installing the wiper blades
► Position the new wiper blade 1 with
recess 6 on lug 5.
► Fold wiper blade 1 in the direction of
arrow 3 onto the wiper arm, until retaining
clips 2 engage in bracket 4.
► Make sure that wiper blade 1 is seated
correctly.
► Fold the wiper arm back onto the
windshield.
Important safety notes
WARNING For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the o ...Replacing the rear window wiper blade
Removing the wiper blade ► Remove the SmartKey from the ignition lock. ► Fold wiper arm 1 away from the rear window until it engages. ► Position wiper blade 2 at a right angle ...See also:
Engine Fan
The vehicle has electric cooling fans. The fans spinning at low speed during
most everyday driving might be heard. The fans can turn off if no cooling is required.
Under heavy vehicle loading, trail ...
Front
The front seats can be warmed by built-in
heaters. The switches located on the
instrument panel can be operated independently
of each other.
1. Start the engine.
2. Select heat range.
...
Jump Starting
For more information about the vehicle battery, see Battery .
If the vehicle's battery has run down, you may want to use another vehicle and
some jumper cables to start your vehicle. Be sure to ...