Mercedes-Benz GL-Class: Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be obstructing the windshield wiper movement.
The wiper motor has been deactivated.
► For safety reasons, you should remove the
SmartKey from the ignition lock.
or
► Switch off the engine using the Start/Stop
button and open the driver's door.
► Remove the cause of the obstruction.
► Switch the windshield wipers back on.
The windshield wipers are inoperative
The windshield wiper drive is malfunctioning.
► Select another wiper speed on the
combination switch.
► Have the windshield wipers checked at a
qualified specialist workshop.
The spray nozzles are misaligned
The windshield washer fluid from the spray nozzles no longer hits the center of the windshield. The spray nozzles are misaligned.
► Have the spray nozzles adjusted at a qualified specialist workshop.
Replacing the rear window wiper blade
Removing the wiper blade
► Remove the SmartKey from the ignition
lock.
► Fold wiper arm 1 away from the rear
window until it engages.
► Position wiper blade 2 at a right angle ...
Climate control
...
See also:
Engine Overheating
The vehicle has several indicators to warn of engine overheating.
There is a coolant temperature gauge on your vehicle's instrument panel. See
Engine Coolant Temperature Gauge .
In additi ...
High-Beam On Light
The high-beam on light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information. ...
Using the system
Initialization
When the ignition switch is pushed to the
ON position, INFINITI Voice Recognition is
initialized, which may take up to one
minute. When completed, the system is
ready to accept ...






