Range Rover: Locking and arming the alarm - Exiting the vehicle - Range Rover Owner's ManualRange Rover: Locking and arming the alarm

WARNING WARNING

Before exiting the vehicle, always ensure that the gear selector is in the Park (P) position, the engine is turned off, the parking brake is applied and the Smart Key is removed from the vehicle.

Press the lock button on the Smart Key briefly, to lock the vehicle and activate the perimeter alarm. The hazard warning lamps will flash to confirm.

The perimeter alarm will sound if:

  • • The hood, tailgate or a door are opened.
  • • The vehicle battery is disconnected.
  • • An attempt is made to disconnect the alarm siren.
    Keyless locking
    The vehicle will not lock automatically. To lock the vehicle press the keyless locking button (arrowed) on the door handle once. The hazard warning lamps will flash once to confirm. In some marke ...

    See also:

    Diagnostics
    OnStar Vehicle Diagnostics will perform a vehicle check every month. It will check the engine, transmission, antilock brakes, and major vehicle systems. It also checks the tire pressures, if the veh ...

    Speed-dependent mode
    If vehicle speed drops below 5 mph (8 km/h) with the wipers operating, the wipers will switch to the next lowest speed. When vehicle speed increases to over 5 mph (8 km/h), the original wiper spee ...

    Exterior Lamp Controls
    The exterior lamps control is located on the instrument panel to the left of the steering wheel. It controls the following systems: ► Headlamps ► Taillamps ► Parking Lamps & ...