Mercedes-Benz GL-Class: Operating the on-board computer
The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock.
You can control the multifunction display and the settings in the on-board computer using the buttons on the multifunction steering wheel.
Speedometer with segments
The segments in the speedometer indicate
which speed range is available.
DISTRONIC activated:
One or two segments in the set speed range
light up.
DISTRONIC detects a vehicle in front:
T ...
Multifunction display
Values and settings as well as display
messages are shown in the multifunction
display.
1 Trip odometer
2 Odometer
3 Transmission position
4 Status bar with outside temperature or
speed
For ...
See also:
Important safety notes
WARNING
When operating the climate control, the air
that enters the passenger compartment
through the air vents can be very hot or very
cold (depending on the set temperature). This
c ...
Vehicle Dynamic Control (VDC) OFF switch
The vehicle should be driven with the
Vehicle Dynamic Control (VDC) system on
for most driving conditions.
If the vehicle is stuck in mud or snow, the
VDC system reduces the engine output to ...
Ride Control System Messages
SERVICE STABILITRAK
If your vehicle has StabiliTrak and this message displays, it means there may
be a problem with the StabiliTrak system. If you see this message, try to reset
the system. Stop; t ...
