Range Rover: Mirror dip when reversing
Selecting reverse gear will cause the door mirrors to automatically adjust, providing an improved viewing angle for reversing.
The exact dipped position can be adjusted when the mirrors are dipped. The next time reverse is selected, the newly adjusted position will be selected.
When the gear selector is moved out of reverse, the mirrors will return to their previous position.
Note: If vehicle speed exceeds 4 mph (7 km/h) in reverse, the mirrors will return to their normal driving position for enhanced visibility.
The automatic mirror dip feature can be enabled or disabled from the Vehicle set-up menu. See 55, INTERACTIVE CONTROLS.
Exterior mirrors
1. Left mirror adjustment.
2. Right mirror adjustment.
3. Press both switches together to fold/unfold the mirrors.
Note: If the mirrors are manually folded or knocked into the folded position
a ...
See also:
PRE-SAFE® (preventative occupantprotection)
WARNING
The PRE-SAFE® system reduces the impact of
an accident on vehicle occupants, as long as
their seat belts have been fastened correctly.
Although your vehicle is equipped with a ...
Forward Collision Warning (FCW) system (if so equipped)
The Forward Collision Warning (FCW) system
will warn the driver by a warning light
and chime when your vehicle is getting
close to the vehicle ahead in the traveling
lane.
The FCW system wil ...
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The height ...
