Mercedes-Benz GL-Class: Instrument cluster
Selecting the unit of measurement for distance
This function is only available in Canada.
The Display unit Speedometer/ Odometer function allows you to choose whether certain displays appear in kilometers or miles.
The selected unit of measurement for distance applies to:
• the analog speedometer
• the odometer and the trip odometer
• the trip computer
• the navigation instruction in the
Navigation menu
• DISTRONIC
► Press the
button on the
steering wheel to select the Settings
menu.
► Press the
button to call up the
selection of submenus.
► Press the
button to select the
Instrument Cluster submenu.
► Press the
button to select Display
Unit Speedometer/Odometer.
► Press the
button to select
km or Miles as the unit of measurement for
distance.
► Press the
,
button to
select a different display.
Selecting the unit of distance for the digital speedometer
► Press
on the steering wheel
to select the Settings menu.
► Press the
button to select submenus.
► Press the
button to select the
Instrument cluster submenu.
► Press the
button to display Display
unit Digital speedometer.
► Press the
button to select
km or miles as the unit of measurement for
distance.
► Press the
,
button to
select a different display.
Selecting the language
The Language: function allows you to select the language for the instrument cluster.
► Press
on the steering wheel
to select the Settings menu.
► Press the
button to select submenus.
► Press
to select the
Instrument cluster submenu.
► Press
to select Language.
► Press the
button to select the
desired language.
► Press the
,
button to
select a different display.
Selecting the status line display
► Press
on the steering wheel
to select the Settings menu.
► Press the
button to select submenus.
► Press
to select the
Instrument cluster submenu.
► Press
to select Status line
display.
► Press
to select the display in
the status line: speed (Speed) or outside
temperature (Outside temp.).
The selected display now appears constantly in the lower multifunction display. When you scroll through the Standard display menu, you will see the display you have not selected.
► Press the
,
button to
select a different display.
Resetting to factory settings
For safety reasons, the Daytime Running
Lamps function in the Lighting submenu is
only reset when the engine is switched off.
► Press
on the steering wheel
to select the Settings menu.
...
Time/date
This submenu is only available on vehicles
with no navigation module. To set the time
and the date for vehicles with a navigation
module, see the separate operating
instructions.
In the Time/da ...
See also:
License Plate Lamp
1. Remove the two screws holding each of the license plate lamps to the molding
that is part of the liftgate.
2. Twist and pull the license plate lamp assembly forward through the molding
opening ...
Lamp check
A bulb check is initiated for some warning lamps when the ignition is switched
on and lasts for 3 seconds (except for the air bag warning lamp which remains illuminated
until the engine is started ...
Pairing and connecting using the mobile phone
Note: The process of pairing and connecting your phone with the vehicle using
the mobile phone will vary depending on the type of mobile phone used.
1. Switch the ignition system on and ensure that ...
