Buick Enclave: Adding Equipment to the Airbag-Equipped Vehicle
Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal may keep the airbag system from working properly.
The operation of the airbag system can also be affected by changing or moving any parts of the front seats, safety belts, airbag sensing and diagnostic module, steering wheel, instrument panel, roof-rail airbag modules, ceiling or pillar garnish trim, overhead console, front sensors, side impact sensors, or airbag wiring.
Your dealer and the service manual have information about the location of the airbag sensors, sensing and diagnostic module, and airbag wiring.
In addition, the vehicle has a passenger sensing system that includes sensors as part of the front outboard passenger seat.
The passenger sensing system may not operate properly if the original seat trim is replaced with non-GM covers, upholstery or trim, or with GM covers, upholstery or trim designed for a different vehicle.
Any object, such as an aftermarket seat heater or a comfort enhancing pad or device, installed under or on top of the seat fabric, could also interfere with the operation of the passenger sensing system.
This could either prevent proper deployment of the passenger airbag(s) or prevent the passenger sensing system from properly turning off the passenger airbag(s).
See Passenger Sensing System .
If the vehicle has roof-rail airbags, see Different Size Tires and Wheels for additional information.
If your vehicle needs to be modified because you have a disability and you have questions about whether the modifications will affect the vehicle's airbag system, or if you have questions about whether the airbag system will be affected if the vehicle is modified for any other reason, call Customer Assistance.
See Customer Assistance Offices (U.S. and Canada) or Customer Assistance Offices (Mexico) .
Servicing the Airbag-Equipped Vehicle
Airbags affect how the vehicle should be serviced. There are parts of the airbag
system in several places around the vehicle.
Your dealer and the service manual have information about servicing the ...
Airbag System Check
The airbag system does not need regularly scheduled maintenance or replacement.
Make sure the airbag readiness light is working.
See Airbag Readiness Light for more information.
Notice: If a ...
See also:
Removing the Flat Tire and Installing the Spare Tire
1. Do a safety check before proceeding. See If a Tire Goes Flat
for more information.
2. To remove the center cap, place the chiseled end of the wheel wrench in the
slot on the wheel an ...
Driver override options
Hill Descent Control (HDC) is automatically engaged for some terrain response
programs. If required, HDC can be deselected or engaged independently of terrain
response.
The HDC status will be dis ...
Dynamic stability control (DSC) (Amber)
Illuminates briefly as a bulb check when the ignition is switched on.
If the lamp flashes while driving, the DSC system is active. If the lamp illuminates
continuously while driving, there is a f ...