Replacing bulbs

...

Xenon bulbs

If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the eng ...

See also:

4WD shift indicator
The 4WD shift indicator is displayed in the vehicle information display. The indicator should turn off within 1 second after placing the ignition switch in the ON position. While the engin ...

Braking
If ABS intervenes when braking, you will feel a pulsing in the brake pedal. ► If ABS intervenes: continue to depress the brake pedal with force until the braking situation is over. ► ...

Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engi ...