Mercedes-Benz GL-Class: Folding the rear bench seat back - Enlarging the cargo compartment - Stowage areas - Stowing and features - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Folding the rear bench seat back

► Pull release catch 3 upwards.

► Pull release catch 3 upwards.
► Fold backrest 2 backwards until it engages, making sure not to trap the seat belts while doing so.
► Fold seat cushion 1 backwards and push until you hear it engage.
► Pull up and adjust the head restraints if necessary.

    Folding the rear bench seat forwards
    If the driver's or front-passenger seat is set for a larger person, it may not be possible to fold the rear bench seat forwards. In this case, move the front seats as far forward as possible. ...

    See also:

    License Plate Lamp
    To replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps to the liftgate trim. 2. Turn and pull the license plate lamp forward through the liftgate trim op ...

    Lumbar Adjustment
    To adjust the lumbar support: Press and hold the front or rear of the control to increase or decrease lumbar support. Press and hold the top or bottom of the control to raise or lower the ...

    Lockout Protection
    If the driver side power door lock switch is pressed when the driver door is open and the key is in the ignition, all of the doors will lock and then the driver door will unlock. If the passenger s ...