Cadillac Escalade: Entering the Feature Settings Menu - Vehicle Personalization - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: Entering the Feature Settings Menu

1. Turn the ignition on and place the vehicle in P (Park). To avoid excessive drain on the battery, it is recommended that the headlamps are turned off.

2. Press the customization button to scroll through the available customizable options.

    Vehicle Personalization
    Your vehicle may have customization capabilities that allow you to program certain features to one preferred setting. Customization features can only be programmed to one setting on the vehicle and ...

    Feature Settings Menu Items
    The following are customization features that allow you to program settings to the vehicle: DISPLAY IN ENGLISH This feature will only display if a language other than English has been set. This fe ...

    See also:

    Uniform Tire Quality Grading
    Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: ...

    Automatic low speed switch-OFF
    If the speed of the vehicle decreases below 18 mph (30 km/h), the ACC system will be automatically switched off and the warning lamp will go out. If the brakes were being applied by the ACC system, ...

    Changing the follow mode set gap
    Four gap settings are available. The selected gap setting is displayed on the message center when the gap adjustment buttons are operated. Each gap level is indicated by an additional chevron in fr ...