Infiniti QX: Cruise control operations
The cruise control allows driving at a speed
between 25 to 90 MPH (40 to 144 km/h)
without keeping your foot on the accelerator
pedal.
To turn on the cruise control, push the
MAIN switch on. The CRUISE indicator will
come on.
To set cruising speed, accelerate your
vehicle to the desired speed, push the
SET/COAST switch and release it. Take your
foot off the accelerator pedal. Your vehicle
will maintain the set speed.
► To pass another vehicle, depress the
accelerator pedal. When you release
the pedal, the vehicle will return to the
previously set speed.
► The vehicle may not maintain the set
speed on winding or hilly roads. If this
happens, drive without the cruise control.
To cancel the preset speed, follow any of these methods:
1. Push the CANCEL switch.
2. Tap the brake pedal.
3. Move the selector lever to the N
(Neutral) position.
4. Turn the MAIN switch off. The CRUISE
indicator light will turn off.
► If you depress the brake pedal while
pushing the RESUME/ACCELERATE or
SET/COAST switch and reset at the
cruising speed, the cruise control will
disengage. Turn the MAIN switch off
once and then turn it on again.
► The cruise control will automatically
cancel if the vehicle slows more than
8 MPH (13 km/h) below the set speed.
► If you move the selector lever to N
(Neutral) position, the cruise control
will be canceled.
To reset at a faster cruising speed, use one
of the following methods:
► Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the SET/COAST
switch.
► Push and hold the RESUME/ACCELERATE
switch. When the vehicle attains
the speed you desire, release the
switch.
► Push, then quickly release the RESUME/
ACCELERATE switch. Each time you do
this, the set speed will increase by
about 1 MPH (1.6 km/h).
To reset at a slower cruising speed, use
one of the following methods:
► Lightly tap the brake pedal. When the
vehicle attains the desired speed, push
the SET/COAST switch and release it.
► Push and hold the SET/COAST switch.
Release the switch when the vehicle
slows down to the desired speed.
► Push, then quickly release the SET/
COAST switch. Each time you do this,
the set speed will decrease by about 1
MPH (1.6 km/h).
To resume the preset speed, push and
release the RESUME/ACCELERATE switch.
The vehicle will resume the last set
cruising speed when the vehicle speed is
over 25 MPH (40 km/h).
Precautions on cruise control
► If the cruise control system malfunctions,
it will cancel automatically. The
CRUISE indicator light on the meter
panel will then blink to warn the driver.
► If the engine coolant ...
Intelligent Cruise Control (ICC) system (if so equipped)
The Intelligent Cruise Control (ICC) system
automatically maintains a selected distance
from the vehicle traveling in front of
you according to that vehicle’s speed (up
to the set speed), or ...
See also:
Driving in Mud, Sand, Snow, or Ice
Use a low gear when driving in mud – the deeper the mud, the lower the gear.
Keep the vehicle moving to avoid getting stuck.
Traction changes when driving on sand. On loose sand, such as on beache ...
Air bag deployment effects
WARNING
When an air bag inflates, a fine powder is released. This is normal and not an
indication of a malfunction. The powder may cause irritation to the skin and should
be thoroughly flush ...
Important safety notes
WARNING
Do not park this vehicle in areas where
combustible materials can come into contact
with the hot exhaust system. Do not park the
vehicle on dry grassland or harvested grain
fi ...






