Infiniti QX: Camera aiding corner sonar function - Around ViewTM Monitor - Monitor, climate, audio, phone and voice recognition systems - Infiniti QX Owner's ManualInfiniti QX: Camera aiding corner sonar function

When the corner of the vehicle moves closer to the object while the Around View Monitor is displayed, an indicator is displayed and a tone is sounded by the corner sonar function to warn the driver. The color of the corner sonar indicator and the pattern of the tone vary according to the distance to the object. When the object is detected, the indicator (green) appears and blinks and the tone sounds intermittently. When the vehicle moves closer to the object, the color of the indicator turns yellow and the rate of the blinking and the volume of the tone increase. When the corner of the vehicle is very close to the object, the indicator stops blinking and turns red, and the tone sounds continuously. Keep the corner sonars (located on the front and rear bumper fascia) free from snow, ice and large accumulations of dirt. Do not clean the sonars with sharp objects. If the sonars are covered, the accuracy of the corner sonar function will be diminished.

► The corner sonar function is not designed WARNING

► The corner sonar function is not designed to prevent the object.
► The colors of the corner sonar indicator and the distance guide lines in the front/ rearview indicate different distances to the object.
► Inclement weather may affect the function of the corner sonar system; this may include reduced performance or a false activation.
► This function is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground.
► If your vehicle sustains damage to the bumper fascia, leaving it misaligned or bent, the sensing zone may be altered causing inaccurate measurement of obstacles or false alarms.

CAUTION
Keep the interior of the vehicle as quiet as possible to hear the tone clearly.

    Difference between predicted and actual distances
    The distance guide line and the vehicle width guide line on the front and the rearview should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on ...

    How to adjust the screen view
    To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor, push the SETTING button with the Around View Monitor on, select the item key and adj ...

    See also:

    Tool kit
    Note: Tool types and positions may vary from the illustrations. The tool kit is located under a panel set in the loadspace floor. Note: Take careful note of the stowage position for each tool, as ...

    Driving on Wet Roads
    Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and ...

    Front fog lamp bulb replacement
    1. Rotate the bulb holder (counter-clockwise) and remove from the lamp unit. 2. Press the two clips together, and remove the electrical connector. ...