Mercedes-Benz GL-Class: Activating the rear view camera
► Make sure that the SmartKey is in
position
2 in the ignition lock.
► Make sure that the "rear view camera"
function is selected in COMAND (see the
separate operating instructions for
COMAND).
► Engage reverse gear.
The area behind the vehicle is shown in the COMAND display with guide lines.
View through the camera
The area behind the vehicle is displayed as a
mirror image, as in the rear-view mirror.
WARNING
The rear view camera is only an aid and may
display obstacles
• from a distorted pers ...
Guide lines in the COMAND display
WARNING
Use of rear view camera can be dangerous if
you are color-blind or have impaired color
vision.
Only use rear view camera if you can see and
distinguish all colored guidelines ...
See also:
Tire Pressure Monitor System
The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check
tire pressure levels. The TPMS sensors monitor the air pressure in your tires and
transmit tire pressure readings ...
Lamp check
A bulb check is initiated for some warning lamps when the ignition is switched
on and lasts for 3 seconds (except for the air bag warning lamp which remains illuminated
until the engine is started ...
Easy route
In Route options, Easy Route can be turned On or Off.
When On is selected, Easy Route changes the calculation parameters of Route 3
in order to reduce:
• Intersections.
• Turns.
• Tur ...