Range Rover: ACC auto OFF
ACC will disengage, but not clear the memory when:
- • The CANCEL button is pressed.
- • The brake pedal is pressed.
- • Neutral (N) is selected.
- • Dynamic Stability Control (DSC) activates.
- • Electronic Traction Control (ETC) activates.
- • Hill Descent Control (HDC) is selected.
ACC will disengage, and clear the memory when:
- • The ignition system is switched off
- • Maximum vehicle speed is reached
- • A fault occurs in the ACC system.
Automatic low speed switch-OFF
If the speed of the vehicle decreases below 18 mph (30 km/h), the ACC system
will be automatically switched off and the warning lamp will go out.
If the brakes were being applied by the ACC system, ...
Resuming the speed and follow mode
NOTICE
RESUME should only be used if the driver is aware of the set speed and intends
to return to it.
By pressing the RESUME button after ACC has been cancelled (e.g. after braking),
the A ...
See also:
Where to Put the Restraint
According to accident statistics, children and infants are safer when properly
restrained in a child restraint system or infant restraint system secured in a rear
seating position.
We recommend t ...
Fuel
Use of the recommended fuel is an important part of the proper maintenance of
this vehicle. To help keep the engine clean and maintain optimum vehicle performance,
we recommend the use of gasoline a ...
Returning the Seat to the Sitting Position
To return the seat to the sitting position from the tumbled position:
1. Pull the seat down until it latches to the floor. The seatback cannot be raised
if the seat is not latched to the floor.
...






